Serial Or Parallel Device Problems; Sound And Speaker Problems; No Sound From Speakers - Dell OptiPlex 745 User Manual

Serial or Parallel Device Problems
Fill out the Diagnostics Checklist as you complete these checks.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTE: If you are having a problem with a printer, see
Check the option setting — See the device's documentation for the recommended settings. Then enter system setup (see
Setup) and ensure that the Serial Port #1 setting (or the Serial Port #2 settings if you have an optional serial port adapter installed) or
the LPT Port Mode setting matches the recommended settings.
Run the Dell Diagnostics — See
Sound and Speaker Problems
Fill out the Diagnostics Checklist as you complete these checks.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

No sound from speakers

NOTE: The volume control in some MP3 players overrides the Windows volume setting. If you have been listening to MP3 songs, ensure that you did not
turn the player volume down or off.
Check the speaker cable connections —
speakers. If you purchased an audio card, ensure that the speakers are connected to the card.
Ensure that the subwoofer and the speakers are turned on —
volume controls, adjust the volume, bass, or treble to eliminate distortion.
Adjust the Windows volume control —
volume is turned up and that the sound is not muted.
Disconnect headphones from the headphone connector —
connected to the computer's front-panel headphone connector.
Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
Enable digital mode — Your speakers do not work if the CD drive is operating in analog mode.
1. Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
2. Click Sounds and Audio Devices.
3. Click the Hardware tab.
4. Double-click the name of your CD drive.
5. Click the Properties tab
6. Check the Enable digital CD audio for this CD-ROM device box.
Eliminate possible interference —
Run the speaker diagnostics
Reinstall the audio driver — See
Check the device option setting —
Printer Problems.
Dell Diagnostics.
Ensure that the speakers are connected as shown on the setup diagram supplied with the
See the setup diagram supplied with the speakers. If your speakers have
Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the
Sound from the speakers is automatically disabled when headphones are
Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.
Reinstalling Drivers and Utilities.
Enter system setup (see Entering System Setup) and ensure that the Audio Controller option is set to
Entering System