Craftsman 919.157260 Owner's Manual page 14

Shut Off Valve: Opens and closes air
fl ow.
Shut-off Valve
Drain Valve: The drain valve is
located at the base of the air tank and
is used to drain condensation at the
end of each use.
Air Intake Filter (not shown): This
fi lter is designed to clean air coming
into the pump. This fi lter must
always be clean and ventilation
openings free from obstructions. See
"Maintenance".
Engine
Stop Lever:
Used to
stop engine.
Push down
and hold
until engine
Stop Lever
shuts off.
How to Use Your Unit
How to Stop:
1. See the engine manufacturer's
manual for the procedure to
safely shut down the gasoline
engine. Turning the gasoline
engine off will turn off the air
compressor as well.
A13567 A13567
Drain
Valve
Engine
Before First Start-up
Break-in Procedure
following break-in instructions are
not closely followed.
This procedure is required when:
1. Before the air compressor is used
for the fi rst time.
2. When the unloader valve is
replaced.
3. When a complete compressor
pump is replaced.
The procedure:
1. To prevent pressure from building
up in the air tanks during this
break-in period, you must
open the unit's unloader valve.
Place unloader valve in "Open"
position as shown.
Open
2. Turn shut-off valve knob into
open position.
open
postion
3. Start engine. See engine manual
supplied by engine manufacturer
for correct procedure.
14- ENG
Serious damage
may result if the