Kenwood TK-3230 Instruction Manual page 32

voX p
roceed
You can set the transceiver to sound an alert tone when you
are able to transmit (transmission is no longer inhibited).
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the
 Press the MENU key then press
(VOX proceed tone on) or "
• You can speak into the microphone at this time to simulate
transmitting. The LED lights orange while speaking if your
voice is at an appropriate level, but no signal is transmitted at
this time.
 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
t
one
or key to select " ".
or to select "
" (VOX proceed tone off).
"