Wi-Fi Settings - Samsung SPRINT SPH-L600 User Manual

Wi-Fi Settings

Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use your phone's
Wi-Fi, you need access to a wireless access point or "hotspot."
For more information about using Wi-Fi, see Wi-Fi.
1. Press and then touch
2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.
3. Touch to configure these settings:

Advanced:
•
Network notification: Alert you when a new Wi-Fi network is available.
•
Passpoint: Connect to passpoint-enabled Wi-Fi Access Points automatically.
•
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data
for data communications when the device goes to sleep (when the backlight goes
out). This setting can affect data usage, since the data connection will remain
active even when the device screen is off.
•
Auto network switch: Auto switch between Wi-Fi networks and mobile
networks.
•
Wi-Fi timer: Automatically connect or disconnect from a Wi-Fi network. Touch
Wi-Fi time to set the Starting time and Ending time.
• MAC address: View the phone's MAC address, needed for connecting to some
secured networks (not configurable).
• IP address: View the phone's IP address (not configurable).

WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or
other equipment.

WPN PIN entry: View the PIN used by your phone to set up a PIN-secured
connection to a Wi-Fi router or other equipment (not configurable).

Help: Get help using Wi-Fi.
Settings
> Settings > Connections tab.
115