Changing Color Panels - RCA PSD100 Owner's Manual

Changing color panels.

If you are redecorating, you can change your dishwasher's front
panel to match or blend with your new colors by flipping it over.
Each side of each panel is a different color. You may also paint a
panel with a color of your own choice.
WARNING!
Wear gloves when handling door panels. Failure to do so can
cause serious cuts.
Do not operate dishwasher while changing panels.
Top
Trim
Bottom Panel Attachment Screws
16
Changing the Door Panel
Take out trim screws on either side of the
1
dishwasher door. Remove the side trim.
Slide the door panel out. (Careful—edges may
2
be sharp.)
Turn the door panel around and put the color you
3
want in front.
Replace the door panel, side trim and screws.
4
NOTE: Do not operate dishwasher while changing panels
or when bottom panel is removed.
Changing the Bottom Panel
Top
Mounting
Remove the bottom panel attachment screws.
1
Screw
Remove the top mounting screws.
2
Take out the top trim screws and remove the top
3
trim.
Slide the color panel(s) up and out and put the
4
color you want in front.
Replace the top trim and screws.
5
Replace the entire assembly by reversing the steps.
6