Electrolux 700XP Specifications

700XP
Gas Tilting Braising Pans
The 700XP range is comprised of over 100 models designed to guarantee the highest level of performance,
reliability, energy saving, safety standards and ergonomic operation. These concepts are reflected throughout
the line in its modularity, construction and numerous configurations: countertop (on base or table),
free-standing, on concrete or stainless steel socle, bridged or cantilever. Thanks to its advance technology and
premium performance, 700XP is a perfect solution for institutions of small sizes with limited footprint as well as
restaurants needing to obtain the most from the kitchen space. The models detailed in this sheet are
freestanding gas tilting bratt/braising pans.
EASY TO INSTALL
• Main connections are
accessible from below the base of
the unit.
EASY TO CLEAN
• All models have right-angled
side edges to allow flush-fitting
joints between units, eliminating
gaps and possible dirt traps.
• Well and double-skinned lid in
stainless steel. Exterior panels in
stainless steel with Scotch Brite
finish.
• The stainless steel well features
rounded corners and has a
seamless weld joining the bottom
plate from the rest of the well for
fast, safe and easy cleaning.
• Feet in stainless steel are
adjustable up to 50mm in height.
EASY TO USE
• Burners with optimized
combustion, flame failure device
and piezo ignition with electronic
flame control.
• Working temperature from 90°C
to 290°C controlled through a
thermostat.
• Choice of well cooking surface in
mild steel or Duomat (a 10
mm-thick alloy obtained by
combining two different stainless
steels to improve the thermal
stability of the cooking surface,
thus allowing for a more
multifunctional use of the bratt
pan - dry and wet cooking can be
performed alternatively - and
ensuring a higher resistance to
corrosion.).
• Cooking surface in mild steel
ideal for sautéing, poaching,
steaming, boiling, stewing and
regular frying. Braising pans with
a mild steel cooking surface are
typically indicated for "dry
cooking" or "shallow frying".
• High- precision manual tilting
system to facilitate the emptying
of the contents in the well.
• All gas appliances are supplied
for use with natural gas or LPG.
Conversion jets supplied as
standard.
EASY TO MAINTAIN
• The special design of the control
knobs and bezels guarantees
against water infiltration.
• IPX4 water protection.