Sony CX400E User Manual page 44

To turn off the power
Close the LCD screen or press the POWER button.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder (
Notes
The recording date and time are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To
display them, select
[Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto
Area ADJ] set to [On]. The clock may not automatically adjust to the correct time, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area
ADJ] to [Off] (models with GPS).
Related topics
Information on your camcorder model:
[Power On By LCD]
To set the date and time again:
To calibrate the touch panel: [Calibration]
Copyright 2013 Sony Corporation
[Setup] [ Playback Settings]
Model Information
[Date & Time Setting]
44
), and then adjust the angle (
[Data Code]
).
Back to top