Table of Contents
Advertisement
Information
Regarding the projector lamp control
WARNING
Don't turn off the projector at least in 5 minutes after activating it.
- The frequent On/Off changes may cause the lamp function to deteriorate.
Don't pull out the power cord while activating the projector and the cooling fan.
- It may cause the lamp life-span to shorten and get damaged.
The life-span of projector may considerably depend on the use environment and treatment conditions.
The projector uses the high pressure mercury lamp so that the serious caution is essential. The shock or abuse while using
may cause lamp to blow off with explosion.
When you continue to use the projector after an interval of lamp replacement, the lamp may be blown off with explosion.
The following treatment should be done, in case of lamp blow-off.
- Pull off the power cord immediately.
- Let some fresh air in immediately (Ventilation).
- Check the product condition at the nearer service center and replace it with new lamp, if necessary.
- Don't try to disassemble the product without the authorized technician.
40
Advertisement
Table of Contents
