Control Settings - GE GSD3400 Series, GSD3600 Series, GSD3700 Series, GSD3900 Series Owner's Manual

Control Settings

Cycles
1
POTS & PANS For heavily soiled dishes or cookware with dried-on
or
HEAVY WASH This cycle will not remove burned-on foods.
HOT START Preheats wash water to correct temperature.
NORMAL WASH For loads of everyday dishes, glasses and cookware
LIGHT WASH For dishes with light soils.
CHINA CRYSTAL For lightly soiled china and crystal.
SHORT WASH For quickly washing loads of everyday dishes with
RINSE ONLY For rinsing partial loads that will be washed later.
PLATE WARMER For warming clean dishes and serving plates. This
Energy Options
2
HI TEMP Provides extra heat for best performance. It is used
WASH best with heavily-soiled dishes.
HI TEMP RINSE Turns on the heater in final rinse cycles to help
HEATED DRY ON/ Turns the drying heater on for fast drying. This
HEATED DRY cycle will extend the time to your wash cycle.
Start
3
Make sure the Dial is at an
Select the desired Cycle and Options. Indicators will
show selections.
Turn the Dial to the desired Cycle. Don't turn it past
the Selected Cycle position, or you could accidentally
miss a rinse.
Latch the door. Cycle On lights up. There is a time
delay between start-up and water fill so you will not
hear any wash action right away.
or baked-on soils. Everyday dishes may be included.
with medium soils. NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
medium soils that have not dried on, such as loads
consisting mostly of glasses.
Do not use detergent.
cycle will take approximately 32 minutes.
prevent spotting on dishware. This option may be
turned ON or OFF during the wash cycle.
position.
OFF
9