Mitsubishi Electric Diamond View DV180 User Manual page 22

Signal timings not shown in the table may not be supported. We
recommend that you set your graphics card to use one of the factory
preset timings to achieve the optimum screen image.
There are 22 modes that are compatible with VESA standards, Windows
95, 98 and NT, and the Apple Macintosh.
In some rare cases, the screen may show a small amount of noise. This
may be caused by non-standard signal frequencies from the VGA card. It
is not a defect. You can improve it by automatic adjustment or by
manually adjusting the Clock Phase and Pixel Frequency in the image
menu.
Some interference lines may appear on your screen when shutting down
the computer system or turning off the monitor. This is normal and will
not harm the monitor.
To extend the product life, we suggest you use the power saving features
of your computer system.
20