HP ProLiant SL4545 Start Manual page 17

QuickSpecs
Configuration Information - Factory Integrated Models
HP I/O Modules
HP Storage Controllers
DIMM slots dedicated per socket.
NOTE: For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: RDIMMs and ULVDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of AMD based servers support RDIMM and
ULVDIMM.
NOTE: Depending on the memory configuration and processor model, the memory
speed may run at 1600MHz or 1333MHz. Please see the Online Memory Configuration
Tool at: www.hp.com/go/ddr3memory-configurator.
Registered DIMMs (RDIMM)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
Ultra Low Voltage DIMM (ULVDIMM)
HP 4GB (1x4GB) Single Rank x4 PC3U-10600R (DDR3-1333) Registered CAS-9 Ultra Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3U-10600R (DDR3-1333) Registered CAS-9 Ultra Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3U-10600R (DDR3-1333) Registered CAS-9 Ultra
Low Voltage Memory Kit
NOTE: One I/O module must be selected per server node. The HP ProLiant SL454x 1G
FIO Module Kit supports two (2) embedded 1Gb NICs. The HP SL454x 10G FIO Input
Output Module Kit supports two (2) embedded 1Gb NICs and two (2) embedded 10Gb
NICs with an optional InfiniBand upgrade.
NOTE: IB supported with addition of HP IB Enablement Kit
NOTE: 10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ (QSA)
adapter 655874-B21.
HP SL454x 1G FIO Input Output Module Kit
NOTE: IB supported with addition of HP IB Enablement Kit
HP SL454x 10G FIO Input Output Module Kit
HP SL454x 10G Input Output Module Kit
NOTE: Quantity of I/O module should be 1 for every 1x60 model, 2 for every 2x25
model and 3 for every 3x15 model.
NOTE: Each node can support up to two of the p420i Gen8 storage controllers to
manage the LFF hard drives.
NOTE: If two p420i Gen8 storage controllers are ordered, the HP SL454x Storage
Mezzanine to PCIe Enablement Kit cannot be ordered
HP Smart Array P420i Mezzanine Controller FIO Kit
NOTE: A cache module must be selected. Zero Memory cache option is not supported.
The 12 inch Supercap kit must be ordered.
Optional Upgrades
HP 1GB P-series Smart Array Flash Backed Write Cache
HP 2GB P-series Smart Array Flash Backed Write Cache
DA - 14407 Worldwide — Version 9 — December 13, 2013
HP ProLiant SL4545 Generation7 (G7) Server
647871-B21
647877-B21
647883-B21
647869-B21
647875-B21
647881-B21
664647-B21
664648-B21
692276-B21
631679-B21
631681-B21
Page 17