How To Fill - HoMedics UHE-CM25 Instruction Manual

How To Use
Power/Mist Knob
Night Light
Illuminated Ring
Power/Mist Knob
Plug unit into a 120 volt AC electrical outlet. Turn the POWER/MIST (
turn the humidifier on.
ATTENTION: When the water in the tank is almost empty, the humidifying function will power off
to indicate to the user to refill the tank.
Mist Adjustment Setting
Mist adjusts from MINIMUM ( ) mist to MAXIMUM (
turn the POWER/MIST knob clockwise. To decrease mist output, turn the POWER/MIST knob
counter-clockwise.
Night Light
Press the NIGHT LIGHT (
) button to turn on the night light. The surround around the
POWER/MIST knob will glow softly.
Mist Selection Dial
Night Light ON/OFF
Button
) knob clockwise to
) mist. To increase the mist output,
6

How to Fill

CAUTION: Before filling unit with water, turn power off and unplug unit from the outlet.
Note: Always use two hands to carry the water tank.
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 7
1. Grasp tank handle and lift up from humidifier base.
2. Turn the tank upside down—remove the tank cap by
turning it counter-clockwise.
3. Fill the water tank with clean, cool (not cold) water. We
recommend using distilled water if you live in a hard
water area.
4. Replace the tank cap by turning clockwise until tight.
5. Install the tank back on the base of the unit. Make sure
the tank is firmly seated.
7