∫ªπÆ 1999.9.15 12:32 PM ∆‰¿Ã¡ˆ25
Standard phone
1. Lift the handset.
2. Dial [1][6] and the 2-digit speed dial location.
To Program A Personal Speed-Dial Number
Keyphone
1. Refer to user programming.
Standard phone
1. Lift the handset.
2. Dial [1][5] and a 2-digit Speed-Dial location (00~19).
3. Dial a trunk number or trunk group number and hookflash.
4. Dial the telephone number and hookflash.
5. Replace the handset.
Chain Dialing
You may manually dial additional digits following a Speed-Dial number, or
chain together as many Speed-Dial locations as required.
Keyphone
After the first Speed-Dial number is dialed, press [SPEED] again and
enter another Speed-Dial location, or manually enter additional digits
following the Speed-Dial number.
Standard phone
After the first Speed-Dial number is dialed, manually dial the
additional digits.
Pause in Normal Dial
When dialing an outside number, press [ P S E ] to insert a preprogrammed
pause time, if [PSE] has been pre-programmed.
DIALING FEATURES
23