Download Print this page

Troubleshooting; Viewing Your Scans; Specifications; Computer System Minimum Requirement - Easypix TSN510 Manual

Advertisement

6. Viewing your scans

1.
Connect your scanner to your computer and then turn on your scanner.
2.
Your computer should recognize the scanner as a "Removable Disk." Click "Open folder
to view files" to view and import scans.
NOTE: If the Removable Device window did not launch automatically, go to your "My Computer"
(PC) and find the device under Removable Storage.
NOTE: In power off mode, connect your scanner to your computer to charge the battery. OR use the
power adapter that is included.

7. Specifications

Image sensor
Color Contact Image Sensor
Number of sensor
6048 dots
Low resolution : 300x300 dpi(default)
Resolution
High resolution: 600x600 dpi
Maximum scanning
Color High resolution: 6 Seconds
speed for A5 size
Color Low resolution: 5 Seconds
document
Capacity (Based on 1GB microSD
card. Scan A5 size file, the quantity
600dpi color: 550 Photos(Min.)
of scans varies depending on the
300dpi color: 1200 Photos(Min.)
content complexity)
Scan width
Approx. 5"
Scan length
300DPI: 53"(Max), 600DPI: 26"(Max)
File format
JPEG
LCD
Scanning status display
Auto Power Off
3 Minutes
USB Port
USB 2.0 high speed
External memory
microSD Card
Standard Battery
4.2V Rechargeable Lithium Polymer battery

8. Computer system minimum requirement

Windows® XP, Windows® Vista™, Windows® 7 and Mac
Operating System
OS® 10.4 or above
(direct plug-in, driver installation not required)
CPU
Pentium III or above
RAM
At least 256MB
Interface
USB port

9. Troubleshooting

Problem
Cause
Cannot turn on the
1. Low battery.
scanner
2. Battery not inserted
properly
Pictures cannot be
1. microSD card has not
saved when you are
been installed
scanning them
correctly.
2. Memory is full
3. The microSD card
has not been
formatted properly
Computer does not
Connection failure.
recognize your scanner
when connected. (You
cannot find removable
disk)
The battery life is
Use wrong type of
very short
battery
Blurry images
The lens of the scanner
is dirty.
ERR. LED is on when
Scanning speed is too
scanning a document
fast
ERR. LED is on after
The calibration data
powering on the
is reset.
scanner
Windows® XP, Windows® Vista™, Windows® 7 are registered trademarks of Microsoft Corporation.
Mac OS® is a registered trademark of Apple Inc.
All trademarks are the property of their respective owner.
Solution
1. Recharge the battery by
connecting scanner to the
computer via USB cable.
2. Replace or install the
battery correctly
1. Install microSD card with
metal side facing
upwards.
2. Download the pictures
from the scanner to the
computer to create
storage space
3. Format your microSD
card. Refer to section 4.4
1. Make sure all cable
connections are secured.
Restart the computer if
necessary
2. Try a different USB port.
Replace with new
4.2V rechargeable battery
1. Clean the lens with soft
dry cloth
2. Recalibrate the scanner.
Refer to section 4.5
Press the [SCAN] button to
reset and try re-scanning
the document more slowly
Recalibrate the scanner.
Refer to section 4.5
AM-TSN510-GB-STD-3

Advertisement

loading