Installation; Installation In Windows; Software Installation - Zte USB Modem User Manual

2.1 Installation in Windows

2.1.1 Software Installation

The system will automatically detect and recognize the new
hardware and display the new icon in the desktop status bar,
indicating that the computer and the USB Modem have been
connected properly. After a few seconds, there will show the
installation interface if the laptop and desktop PC supports
automatic installation.
If the laptop and desktop PC doesn't support automatic
installation, start the installation program by run the Install.exe
from the CD-ROM drive. And follow the system prompts to
complete the software installation.
1. Click on the drop-down button to choose the setup language,
and click "OK" button.
2. Click "Next" button to continue.
3. Select the folder that you want to install the software, and you
can select a different location by pressing "Change" button,
then click "Next" button.
4. Wait until the setup procedure is completed, select "Yes, I
want to restart my computer now." and click "Finish" button
to end the installation.
Note：If you have problems with installation after the upper
operation, please contact the shop or ZTE.
After the installation, select the "Start → Programs" and there
will be a "Join Air" program group，which includes "Join Air" and
"UNINSTALL". There will be a Shortcut icon

2 Installation

8
on the desktop.