Ipevo Point 2 View Quick Start Manual

Quick Start Guide
Point 2 View
3. The Software Interface at a Glance
Switch between the three modes shown below using the Mode tabs at the left of the window.
Camera Mode (default)
Shows the live video image and allows
you to focus and take snapshots
1
2
c Use menus to adjust view: zoom,
mirror, resolution, etc.
d A focus frame at the center guides
you when bringing Point 2 View into
focus
e Click on-screen icons to focus and
take snapshots
www.ipevo.com
Review Mode
Shows your snapshots and allows you
to easily view and organize them
3
c Use menus to adjust view (zoom,
rotate) or edit photos (copy, delete)
d The latest photo appears in the main
screen
e Use thumbnails for quick overview
1. Package Contents
Your Point 2 View product package should contain these items:
2. Installing P2V Software
Follow these easy steps to install P2V (Point 2 View) software.
Step 1:
instructions in the setup program.
Step 2:
Step 3:
Activate the software. A live video image should appear in the
screen.
1
2
3
Full Screen Mode
Shows the live video image in full
screen and allows you to share the
image in presentations
2
c Esc button returns the screen to
Camera mode
d Click on the screen to hide the icons
and provide an unobstructed image.
Click again to bring the icons back
e Focus/Snapshot icons are available
in this mode also
1
3