Training With Power Meters; Setting Your Power Zones; Calibrating Your Power Meter; Pairing Your Ant+ Sensors - Garmin Edge 810 Owner's Manual

Training with Power Meters

• Go to www.garmin.com/intosports
ANT+ sensors that are compatible with your device.
• For more information, see the owner's manual for your power
meter.
• Adjust your power zones to match your goals and abilities
(page 7).
• Use range alerts to be notified when you reach a specified
power zone (page 3).
• Customize the power data fields

Setting Your Power Zones

The values for the zones are default values and may not match
your personal abilities. You can manually adjust your zones on
the device or using Garmin Connect. If you know your functional
threshold power (FTP) value, you can enter it and allow the
software to calculate your power zones automatically.
1
From the home screen, select
Power.
2
Enter your FTP value.
3
Select Based On:.
4 Select an option:
• Select Watts to view and edit the zones in watts.
• Select % FTP to view and edit the zones as a percentage
of your functional threshold power.

Calibrating Your Power Meter

Before you can calibrate your power meter, it must be properly
installed, paired with your GPS device, and actively recording
data.
For calibration instructions specific to your power meter, refer to
the manufacturer's instructions.
1 From the home screen, select
2
Select Bike Profiles.
3
Select a profile.
4
Select > Calibrate.
5
Keep your power meter active by pedaling until the message
appears.
6
Follow the on-screen instructions.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or
install the sensor.
Pairing is the connecting of ANT+ wireless sensors, for
example, connecting a heart rate monitor with your Garmin
device.
1
Bring the device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2 From the home screen, select
3
Select a profile.
4
Select a sensor.
5
Enable the sensor, and select Search.
When the sensor is paired with your device, the sensor
status is Connected. You can customize a data field to
display sensor data.

Pairing a Heart Rate Monitor

Before you can pair, you must put on the heart rate monitor.
1
Bring the device within range (3 m) of the heart rate monitor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.

History

for a list of third-party
(page 11).
> Training Zones >
.
> Bike Profiles
2 Select > Heart Rate > Enable > Search.
When the heart rate monitor is paired with your device, the
sensor status is Connected.

Using the Weight Scale

If you have an ANT+ compatible weight scale, the device can
read the data from the weight scale.
1
From the home screen, select
A message appears when the weight scale is found.
2
Stand on the scale when indicated.
NOTE: If using a body composition scale, remove shoes and
socks to ensure that all body composition parameters are
read and recorded.
3
Step off the scale when indicated.
TIP: If an error occurs, step off the scale. Step on when
indicated.
History
History includes time, distance, calories, speed, lap data,
elevation, and optional ANT+ sensor information.
NOTE: History is not recorded while the timer is stopped or
paused.
When the device memory is full, a message appears. The
device does not automatically delete or overwrite your history.
Upload your history to Garmin Connect periodically to keep
track of all your ride data.

Viewing Your Ride

1
From the home screen, select
2
Select Last Ride or All Rides.
3
Select an option.

Viewing Data Totals

You can view the accumulated data you have saved to the
Edge, including the number of rides, time, distance, and
calories.
From the home screen, select

Sending Your Ride to Garmin Connect

To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.
1
Pull up the weather cap
2
Plug the small end of the USB cable into the mini-USB port.
3
Plug the large end of the USB cable into a computer USB
port.
4
Go to www.garminconnect.com.
> Weight Scale.
> Rides.
> Totals.
NOTICE
from the mini-USB port .
7