Configure A Vlan Profile - NETGEAR ProSAFE SRX5308 Reference Manual

firewall's LAN IP address). When the DNS proxy option is disabled for a VLAN, all DHCP
clients receive the DNS IP addresses of the ISP but without the DNS proxy IP address.
LDAP Server
A Lightweight Directory Access Protocol (LDAP) server allows a user to query and modify
directory services that run over TCP/IP. For example, clients can query email addresses,
contact information, and other service information using an LDAP server. For each VLAN,
you can specify an LDAP server and a search base that defines the location in the directory
(that is, the directory tree) from which the LDAP search begins.

Configure a VLAN Profile

For each VLAN on the VPN firewall, you can configure its profile, port membership, LAN
TCP/IP settings, DHCP options, DNS server, and inter-VLAN routing capability.

To add a VLAN profile:
1. Select Network Configuration > LAN Settings. In the upper right of the screen, the
IPv4 radio button is selected by default. The LAN submenu tabs display, with the LAN
Setup screen in view, displaying the IPv4 settings. (The following figure contains some
VLAN profiles as an example.)
Note: For information about how to manage VLANs, see
VLANs
configure a VLAN profile.
Figure 51.
2. Click the Add table button under the VLAN Profiles table. The Add VLAN Profile screen
displays:
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
on page 85. The following information describes how to
LAN Configuration
Port-Based
88