Function
LED Behavior
Subwoofer Levels
Two center LEDs
indicate Subwoofer
Subwoofer
DTS TruSurround
Surround On:
On/Off
Surround Off:
Surnd
DTS TruVolume
TruVolume On:
On/Off
TruVolume Off:
TruVol
Night Mode On/Off
Night Mode On:
Night
Night Mode Off:
TV Remote
TV Remote On:
VZtv Rmt
On
TV Remote Off:
Eco Power On/Off
Eco Power On:
EcoPwr
On
Eco Power Off:
Program Remote
Prg Remote
Reset
Reset
No
Press the Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the right with increasing levels and to the left
level 0.
with decreasing levels.
Press the Next/Previous button to enable/disable DTS TruSurround. When
enabled (On), all inputs will produce virtual surround sound. When disabled
(Off), all sources will playback in 2.1 stereo.
Press the Next/Previous button to enable/disable TruVolume. When enabled
(On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
Press the Next/Previous button to enable/disable Night Mode. When enabled
(On), the Sound Bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the Sound Bar
(using the TV Volume Up button) and control volume.
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the Sound Bar will go into standby after a period of inactivity. The sound bar
will automatically turn off when no audio signal is detected. Off disables this feature.
Note: Enable this function if using a TV remote to control the sound bar.
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions on
---
your Sound Bar. See " Program Remote " on page 16 for more information.
Press the Next/Previous and Play buttons to select and reset your remote and
Sound Bar to the factory default settings. All paired Bluetooth devices will be
---
unpaired. All programmed IR remotes will also be removed. See " Reset to Factory
Default Settings " on page 17 for more information.
Description
15