Replacing The Lightbulbs - GE 22 Installation And Owner's Manual

Care and cleaning of the refrigerator.
12
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the
doors open.
On automatic icemaker models, set the
icemaker power switch to 0 (off) and shut
off the water supply to the refrigerator.
Preparing to Move
Secure all loose items such as grille, shelves
and drawers by taping them securely in
place to prevent damage.
Lightbulb Replacement
To replace a burned-out bulb, unplug
the refrigerator from its electrical outlet,
unscrew the bulb when cool and replace
it with an appliance bulb of the same or
lower wattage.
If the temperature can drop below freezing,
have a qualified servicer drain the water
supply system (on some models) to prevent
serious property damage due to flooding.
Be sure the refrigerator stays in an upright
position during moving.
When changing the freezer light, first
remove the light shield.
Turning the control to the OFF
not remove power to the light circuit.
position does