Quick Guide To Your Tv - GE CRT Television User Manual

Quick Guide to Your TV

Startup
The steps below will get your TV connected and ready for watching. For
more details, see the page numbers listed.
1
. Hook up your TV
Details are in the Connections
Guide.
CAUTION: Matching stands were designed to be used with the TV models included in this book. The
recommended stands are provided with hardware to secure the TV to the stand so that it cannot be easily
pulled off or tipped over. Your GE dealer can help you choose the appropriate stand for your TV.
Stands are not available by mail order. To locate your nearest GE dealer call 1-800-447-1700.
If you choose not to use the stand recommended for your TV, take precautions that the stand or furniture the
TV is placed on is properly located and of adequate size and strength to prevent the TV from accidentally
being tipped over or pulled off. This could cause damage to the TV and or personal injury.
2
. Plug in the TV
3.
Put Batteries in the Remote
2
Use This Book First!
CONNECTIONS
GUIDE
THIS GUIDE
SHOWS HOW
TO HOOK UP
YOUR TV
AND OTHER
COMPONENTS.
To Find
Your Hook-up
Turn To
Page 1
Hook up any antennas, cables or
other equipment to your TV before
you follow the steps below.
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
A. Pull off the cover of the battery
compartment.
B. Place the two AAA batteries as
shown, matching the
end of each battery in the
compartment.
C. Replace the cover.
+ –
and