Monitoring Vpn Tunnel Connection Status - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336Gv2 Reference Manual

Monitoring VPN Tunnel Connection Status

To review the status of current VPN tunnels:
1. Select VPN > Connection Status from the menu, and then select the IPsec VPN
Connection Status tab. The IPsec Connection Status screen is displayed.
The Active IPsec SAs table lists each active connection with the following information.
Table 9-6. IPsec Connection Status Fields
Item
Policy Name
Endpoint
Tx (KB)
Tx (Packets)
State
Action
2. Select the SSL VPN Connection Status tab. The SLL VPN Connection Status screen is
displayed
The active SSL VPN user's user name, group, and IP address are listed in the table with
a timestamp indicating the time and date that the user connected. You can disconnect an
active SSL VPN user by clicking Disconnect to the right of the user's list entry.
160 | Chapter 9: Monitoring System Performance
Description
The name of the VPN policy associated with this SA.
The IP address on the remote VPN endpoint.
The amount of data transmitted over this SA.
The number of IP packets transmitted over this SA.
The current status of the SA. Phase 1 is Authentication phase and
Phase 2 is Key Exchange phase.
Use this button to terminate/build the SA (connection) if required.