NETGEAR N600 DGND3700v2 User Manual page 47

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Enter the remote IP address of the gateway you want to connect to, or provide the
Internet name of the gateway. The Internet name is the fully qualified domain name, as
set up in a Dynamic DNS service.
4. Click the Next button.
Enter the remote LAN IP address and subnet mask of the remote gateway.
• If this information does not match the LAN IP address and subnet mask in the remote
gateway, the secure tunnel fails to connect.
• The IP address range used on the remote LAN has to be different from the IP address
range used on the local LAN.
5. Click the Next button.
This screen shows the summary of the Wizard configuration with a link to view the VPNC
recommended parameters (click the here link to view the VPNC-recommended
parameters).
6. Click the Done button.
For information about how to add or modify VPN policies, see
Genie Advanced Home
47
VPN Policies on page 123.