NETGEAR N600 DGND3700v2 User Manual page 31

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
These fields display when your ISP requires a login:
• Internet Service Provider Encapsulation. ISP types. The choices are PPPoE, PPTP, or
L2TP.
• Login. The login name provided by your ISP. This is often an email address.
• Password. The password that you use to log in to your ISP.
• Idle Timeout (In minutes). If you want to change the login time-out, enter a new value in
minutes. This determines how long the wireless modem router keeps the Internet
connection active after there is no Internet activity from the LAN. Entering a value of 0
(zero) means never log out.
Internet IP Address.
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP's wireless modem router to
which your wireless modem router will connect.
Domain Name Server (DNS) Address. The DNS server is used to look up site addresses
based on their names.
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
• Use These DNS Servers. If you know that your ISP does not automatically transmit DNS
addresses to the wireless modem router during login, select this option, and enter the IP
address of your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
Wireless Modem Router MAC Address. The Ethernet MAC address used by the wireless
modem router on the Internet port. Some ISPs register the MAC address of the network
interface card in your computer when your account is first opened. They will then accept
traffic only from the MAC address of that computer. This feature allows your wireless modem
router to use your computer's MAC address (this is also called cloning).
• Use Default Address. Use the default MAC address.
• Use Computer MAC Address. The wireless modem router will capture and use the MAC
address of the computer that you are now using. You have to use the one computer that
is allowed by the ISP.
• Use This MAC Address. Enter the MAC address that you want to use.
Genie Basic Settings
31