Auto Config - NETGEAR N600 User Manual

N600 Wireless Dual Band Gigabit Router WNDR3700v4
function has two modes. The default is Secured mode, which checks both TCP and UDP
packets. For Open mode, the checking is applied only to the UDP connection.

Auto Config

In the IPv6 screen, when you select Auto Config from the drop-down list, the following screen
displays.
The following fields are included in this screen:
DHCP User Class. Most people do not need to fill in this field, but if your ISP has given you a
specific host name, enter it here.
DHCP Domain Name. This is not needed for most connections. You can type the domain
name of your ISP. For example, if your ISP's mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name.
If your ISP provided you with a domain name, type it in this field. For example, Earthlink
Cable might require a host name of home, and Comcast sometimes supplies a domain
name.
This is the domain name for the IPv6 connection. Do not enter the domain name for the IPv4
connection here.
The other settings are the same as Auto Detect mode. See IPv6 LAN Setup and IPv6
Filtering on page 94.
Advanced Settings
95