Installing A Memory Module; Attaching The Cover - Fujitsu T4410 Operating Manual

Removing and installing components during servicing

Installing a memory module

Memory bank 0 must always be loaded.
1

Attaching the cover

► Place the cover into position, following the direction of the arrow (1).
► Secure the cover with the screws (2).
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
92
2
a
2
"Removing and installing the battery", Page
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
Memory module Memory expansion
► Carefully push the memory module
downwards until you feel it click
into place (2).
2
1
54).
Fujitsu Technology Solutions