The Lcd Screen Is Difficult To Read; The External Monitor Remains Blank; The External Monitor Is Blank Or The Image Is Unstable - Fujitsu T4410 Operating Manual

Troubleshooting and tips
The LCD screen is difficult to read
LCDscreen LCDscreen
Cause
Reflected glare

The external monitor remains blank

Monitor
Cause
Monitor is switched off.
Power saving has been activated (monitor is
blank).
Brightness is set to dark.
Screen output is set to the notebook's LCD
screen
The external monitor's power cable or data
cable is not connected properly.

The external monitor is blank or the image is unstable

Screen Monitor
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
102
Troubleshooting
► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
Troubleshooting
► Switch the external monitor on.
► Press any key to continue.
► Adjust the brightness of the monitor.
► Press the key combination to switch the
screen output, see
Page 45.
► Switch off the external monitor and the
notebook.
► Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and the
notebook.
Troubleshooting
► Terminate the application program in
Windows by pressing
fault persists after closing the program, use
the key combination for switching the screen
output (see "Key combinations", Page
switch over to the notebook's LCD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
"Key combinations",
+ . If the
Alt F4
Fujitsu Technology Solutions
45) to