NETGEAR ProSAFE WN203 Reference Manual page 121

ProSAFE Single Band 802.11n Wireless Access Point WN203
| |
| |-radius>
| | |-primary>
| | | |-auth port>
| | | |-auth secret>
| | | |-auth server>
| | | |-acct port>
| | | |-acct secret>
| | | |-acct server>
| | |
| |
| | |-secondary>
| | | |-auth port>
| | | |-auth secret>
| | | |-auth server>
| | | |-acct port>
| | | |-acct secret>
| | | |-acct server>
| | |
| |
| |-remote>
| | |-ssh
| | |-telnet
| |
| |-snmp-setting>
| | |-read community
| | |-read-write community
| | |-snmp-status
| | |-trap community
| | |-trap server
| | |-trap-port
| |
| |-spanning-tree status
| |
| |-syslog>
| | |-port
| | |-server
| | |-status
| |
| |-time-settings>
| | |-ntp>
| | | |-client
| | | |-custom-server
| | | |-server
| | |
| | |-timezone
| |
| |-vlan>
| | |-management-vlan
| | |-untagged-vlan id
| | |-untagged-vlan-status
| |
|
--RADIUS server settings
--Primary RADIUS server
--Authentication port
--Authentication Shared secret
--Authentication server
--Accounting port
--Accounting Shared secret
--Accounting server
--Secondary RADIUS server
--Authentication port
--Authentication Shared secret
--Authentication server
--Accounting port
--Accounting Shared secret
--Accounting server
--Remote access settings
--Enable remote access via SSH
--Enable remote access via Telnet
--SNMP settings
--SNMP Read Community
--SNMP Read Write Community
--SNMP status
--SNMP Trap Community
--SNMP Trap Server IP address
--SNMP Trap port
--Enable spanning tree protocol
--Syslog setting
--Syslog server port number
--Syslog server IP address
--Enable syslog client
--Time Setting
--NTP sever settings
--Client enable
--Custom server enable
--Server host name
--Time zone
--VLAN settings
--Management VLAN id
--Untagged VLAN id
--Untagged VLAN status
Command-Line Reference
121