Electrolux W4600X Specifications

Features and benefits
• Clarus Control with:
®
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• Large door opening for easy loading/unloading
• Super Balance, software ensure a quick
distribution/extraction cycle with low noise/vibration level
• Frequency controlled motor
• Prepared for manual or automatic detergent supply
• Stainless steel in all vital parts for high degree of rust protection
• Stainless steel front panels and powder painted side panels
• Non-heated or direct steam heating
• Electrical heating (only W4350X, W4600X)
Main options
• Stainless steel panels
• Coin-meter (only W4280X, W4350X)
• Five compartment supply injector (only W4600X)
• Third water inlet valve (only W4600X)
Main specifications
Rated capacity, filling factor 1:10
Drum, volume
diameter
Extraction max
G-factor
Heating alternatives
, 230/400V
Consumption data "Normal 60°C" 1:10*
Total time
Water consumption (cold/hot)
Energy consumption (motor/heating)
Steam consumption
* Water temperature 15°C cold water and 65°C hot water.
** Depending on steam pressure.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
electricity
steam
non-heated
Washer extractors
W4280X, W4350X, W4600X
Images shown are a representation of the product only and
variations may occur.
W4280X
kg/lb 28/62
litre 280
830
ø mm
rpm 805
300
kW -
x
x
Steam El
min ** 49
litre 308/- 313/62
0.35/- 0.5/2.4
kWh
kg 7.3 -
PROFESSIONAL LAUNDRY
W4350X W4600X
35/77 60/135
350 600
920 980
650 630
220 220
25 40.8
x x
x x
Steam El
** 45
375/- 598/105
0.5/- 2.1/5.4
9.5 -
Steam
**
703/-
2.1/-
16