Headset And Belt Clip Operation; Connecting The Belt Clip; Battery Safety Precautions - GE 27957 User Manual

Battery Safety Precautions

• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
CAUTION: To reduce the risk of fire or personal injury, use only the
battery listed in the instruction book.

Headset and Belt Clip Operation

Connecting an Optional Headset to the Handset
For hands free conversation, connect the headset (optional) to the HEADSET
jack as shown.The handset receiver and microphone are disabled when the
headset is connected.
Adjust the headset to rest comfortably on top of your head and over your
ear. Move the microphone to approximately 2 to 3 inches from your mouth.
• Press theTALK/call back button to answer or place a call before using the
headset.

Connecting the Belt Clip

There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots.
Snap the ends of the belt clip into place.
40
NOTE: The RBRC seal on the battery used in your
ATLINKS USA, Inc. product indicates that we are
participating in a program to collect and recycle
Nickel Cadmium batteries throughout the
United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.