HP COMPAQ PRO 6300 Specification page 29

QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
HP 120-GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
HP 128 GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
120 GB
Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Serial ATA 2.0 (3.0 Gb/s)
2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm
0.18 lb/80 g
Sustained Sequential Read: Up to 250 MB/s
Sustained Sequential Write: Up to 70 MB/s
Random Read: Up to 35K IOPs
Random Write: Up to 6.6K IOPs
Write: 85-ms
DC power requirement: 5 VDC 5%-100 mV ripple p-p
Total power consumption: 0.15W (active); 0.075W (idle)
35TB written, up to 20GB/day for 5 years
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Maximum Wet Bulb
Temperature (operating):
Shock: 1,500 G/0.5-ms
128 GB*
Multi Level Cell (MLC) NAND
SATA 6 GB/sec
2.75 x 0.276 x 3.96 in (6.985 x 0.7 x 10.05 cm)
0.16 lb (73 g)
Sustained Sequential Read: Up to 450 MB/s
Sustained Sequential Write: Up to 260 MB/s
Random Read: up to 46K IOPs
Random Write: up to 56K IOPs
Write: 55ms (TYP)
DC power requirement: Min 4.5 V; Max 5.5 V
Total power consumption: 160 mW (Active) ; <85 mW; (Idle)
1.2 million device hours**
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
DA - 14351 North America — Version 35 — November 21, 2013
HP COMPAQ PRO 6300 ALL-IN-ONE PC
Read: 65-ms
84° F (29° C)
Read: 55ms (TYP)
Page 29