Additional Features - HP rp5800 Quickspecs

QuickSpecs
Technical Specifications

Additional Features

Intel® Standard Manageability
DASH 1.1 support (Desktop and Mobile
Architecture for System Hardware)
ASF 2.0 support (Alert Standard Format)
TXT (Trusted Execution Technology) and
VT-d (Virtualized devices)
Computrace
Towerable Orientation
Drive Protection System
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I – Drive Failure Prediction
SMART II – Off-Line Data Collection
SMART III – Off-Line Read Scanning with
Defect Reallocation
Requires the utilization of the integrated network connection
Delivered with processors that are not part of the Intel Stable Intel Platform
Program (SIPP)
Intel Advanced Management Technology (AMT) v3.2
Basic Retail SYSTEM management capabilities such as asset inventory, HW
alerting, SOL/IDE-R, remote configuration, agent presence and system defense.
DASH 1.1 compliance. Support for profile updates.
Host VPN support for local management VPN tunneling
Intel Standard Manageability includes features of Intel Active Management Technology
(Intel AMT). Intel AMT requires the Retail system to have an Intel AMT-enabled chipset,
network hardware and software, as well as connection with a power source and a
corporate network connection. Setup requires configuration by the purchaser and may
require scripting with the management console or further integration into existing
security frameworks to enable certain functionality. For more information, see
http://www.intel.com/technology/platform-technology/intel-amt/.
A standards initiative for representing out-of-band management capability for Retail
Systems. It is a secure, web-services based successor to ASF.
Industry-standard specification for network alerting in operating system-absent
environments
TXT allows for secure management (via TPM) and measured launch of VMM, as well as
teardown of secrets in unexpected reset case. TXT support provided in select Intel
processors
VT-d is a chipset technology that virtualizes directed I/O
Together, TXT and VT-d may be used to support verified launch of a known trusted VMM
that also may protect VMs from accessing each other's memory.
Computrace agent support standard
The chassis can be oriented as either a desktop or a tower.
DPS Access through F10 Setup during Boot
A diagnostic hard drive self test. It scans critical physical components and every sector of
the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a Windows-
based diagnostics utility or through the Retail System's setup procedure. It produces an
evaluation on whether the hard drive is the source of the problem and needs to be
replaced
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures
Allows hard drives to monitor their own health and to raise flags if imminent failures were
predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
DA - 13982 North America — Version 12 — November 8, 2013
HP rp5800 Retail System
Description
Page 20