Advertisement
QuickSpecs
Standard Features
What is HP SmartMemory? HP SmartMemory is unique technology introduced for ProLiant Gen8 servers that unlocks certain features
Memory Quality and
Reliability
Performance
Power Efficiency
Pre-Failure Alert
available only with HP Qualified Server memory. HP SmartMemory enables ProLiant Gen8 systems to
reliably identify and verify whether installed memory has passed HP's rigorous qualification and test
processes. And because the memory is authenticated, extended memory performance features can be
enabled through the system ROM. HP SmartMemory will provide a platform to allow future memory-
related support enhancements through HP Active Health System, System Insight Management and Insight
Control management software.
Today's IT environments are seeing larger, more complex applications, an increase of mission-critical data
moving to the server, increasing demand for transaction processing and critical server consolidation.
Memory is a critical component of the information system, significantly defining the systems reliability,
performance, and increasingly the overall server and data center power footprint. This is why HP Qualified
Server Memory undergoes intense rigorous qualification process that begins with using the highest quality
components sourced from tier 1 DRAM suppliers. Only memory that meets HP's strict requirements are
selected to begin the HP Memory Qualification process. Unlike most third party memory manufacturers,
testing is performed and optimized on every HP ProLiant server platform to ensure upmost compatibility,
performance and reliability.
Because HP SmartMemory is certified, performance tested and tuned for HP ProLiant, certain performance
features are unique with HP SmartMemory. For example, while the industry supports DDR3-1333 RDIMM at
1.5V, today's Gen8 servers support DDR3-1333 RDIMM up to 3 DIMMs per channel at 1066MT/s running at
1.35V. This equates to up to 20% less power at the DIMM level with no performance penalty and now with
HyperCloud Memory on DL360p Gen8 and the DL380p Gen8 servers will support 3 DIMMs per channel at
1333MT/s running at 1.5 V. In addition, the industry supports UDIMM at 2 DIMMs per channel at 1066MT/s.
HP SmartMemory supports 2 DIMMs per channel 1333MT/s, or 25% greater bandwidth.
Memory plays an increasingly larger part of the server's power consumption and choosing the most
efficient memory is a critical component in reducing your data center's overall power and cooling
requirements. This savings translates to reduced operating cost and a faster return on investment, freeing
up IT budget spent on power and cooling.
HP is committed to helping you get the maximum benefit per watt out of your IT infrastructure. For
example, HP SmartMemory 1.35V DDR3-1333 Registered memory is engineered to achieve the same
performance level as 1.5V memory. This also simplifies the HP memory portfolio making it easier to select
the right memory.
When used in conjunction with Systems Insight Manager, the SMART capable firmware enables fault
prediction capabilities. If potential problems develop in one of the DIMMs, Systems Insight Manager lets
you know in advance so you can have the DIMM replaced, before it fails, under warranty.
NOTE: HP memory is protected by a Pre-Failure Alert when used with HP Systems Insight Manager,
allowing memory to be replaced before failure under warranty. In addition, HP memory is covered by a one
or three-year limited on-site warranty period for the system in which they are installed. The memory
warranty is automatically uplifted when used in a server for which a Care Pack is purchased. Please see the
Support Services section below for additional services.
DA - 14225 Worldwide — Version 11 — October 8, 2013
HP SmartMemory
Page 3
Advertisement
