HTC G1 User Manual page 68

Notes
• The next time your phone connects to a previously accessed secured wireless network, you will not
be prompted to enter the WEP key again, unless you reset your phone to its factory default
settings.
• Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone
to connect to a Wi-Fi network. It may be necessary to provide a username and password for
certain closed wireless networks.
To check the wireless network status
You can check the current wireless connection status from the following:
• Status bar
When your phone is connected to a wireless network, the Wi-Fi icon
and tells you the approximate signal strength (number of bands that light up). If
notification
in Wi-Fi settings is enabled, this icon
detects an available wireless network within range.
• Wi-Fi networks
On the Wireless controls screen, touch
phone is currently connected to. The Wi-Fi network name, status, speed, signal strength, security
information, and IP address are displayed.
Note
If you want to remove the wireless network settings on your phone, touch
window. You will need to enter the settings again if you want to connect to this wireless network.
To connect to another Wi-Fi network
1 On the Wireless controls screen, touch
Wi-Fi networks section.
Tip
To manually scan for available Wi-Fi networks, on the Wi-Fi settings screen, press
Scan
touch .
2 Touch another Wi-Fi network to connect to it.
Note
If the wireless network you want to connect to is not in the list of detected networks, scroll down
Add Wi-Fi network
the screen, then touch
T-Mobile G1 User Manual
appears in the status bar whenever the phone
Wi-Fi
settings, then touch the wireless network that the
Wi-Fi settings
. Detected Wi-Fi networks are displayed in the
. Enter the wireless network settings, then touch
68
appears in the status bar
Network
Forget
on this
MENU
and then
Save
.
May 27, 2009