Digital Zoom
This displays an enlargement of the designated part of the displayed image.
1
Display the operation guide.
During Digital Zoom, only the following buttons can be operated.
[Remote control]
2
Select the area of the image to be enlarged.
3
Select the magni¿ cation required for the enlarged display.
4
Return to normal display (quit Digital Zoom).
Notes:
• When power goes OFF (including "Off Timer" operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
"Multi-viewer" (P AND P, P OUT P, P IN P) operation. (see page 20)
When MULTI DISPLAY SETUP is ON (see page 44).
When PORTRAIT SETUP is ON (see page 47).
When SCREENSAVER (except for NEGATIVE IMAGE) is running. (see page 36)
• While Digital Zoom is in operation, "Adjusting POS. /SIZE" cannot be used.
Press to access Digital Zoom.
The operation guide will be displayed.
Press on the enlargement location to select.
The cursor will move.
Each time this is pressed, the magni¿ cation factor changes.
This is shown in the image being displayed.
Press to exit from the Digital Zoom.
OFF TIMER button
VOL button
MUTE button
POSITION /
ACTION button
1
[Unit]
+
INPUT
MENU
-/
VOL
/
VOL button
2
3
EXIT
1
ENTER/
EXIT
2
2
4
23