Panasonic PT-DZ870E Operating Instructions Manual page 144

[Detail control] page
Click [Projector control] → [Detail control].
1 Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is
updated.
2 [SUB MEMORY]
Switches the sub memory.
3 [SYSTEM DAYLIGHT VIEW]
Switches to system daylight view settings.
4 [FREEZE]
Temporarily pauses the image.
5 [P IN P]
Switches the P IN P setting.
144 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
1
2
3
4
5
6
7
8
9
10
6 [LEFT/RIGHT SWAP]
Switches the flip horizontal settings.
7 [WAVEFORM MONITOR]
Displays the waveform of the input signal.
8 [LENS]
Adjusts the projection lens.
9 [TEST PATTERN]
Displays the test pattern.
10 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.