Table of Contents
Advertisement
Ceiling mount bracket safeguards
Specifications
Dimensions
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician.
z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused
z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental
conditions.
Remove an unused ceiling mount bracket promptly.
z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
z
For details, see the work instruction manual packed together with the ceiling mount bracket.
z
The model Nos. of the accessories and the parts sold separately are subject to change without notice.
z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or
z
board) in the ceiling board. Otherwise it may result in fire hazard.
Bottom view
70
- ENGLISH
288.0 (11.3")
*1: PT-TX300EA
*2: PT-TW330EA, PT-TW240EA
: Actual dimension may differ by product.
Model No. of ceiling mount bracket:
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount bracket:
ET-PKL300B
M3 x 0.5
6 mm (0.24")
Torque:0.8 ± 0.1 N · m
<Unit : mm (inch)>
70.8 (2.79")
Advertisement
Table of Contents
