Table of Contents
Advertisement
Basic Operation
Powering ON/OFF
Connecting the power cord
Use the supplied power cord to prevent removal of the power cord and make sure that it is fully
inserted into the projector.
For detailed power cord handling, refer to "Read this first!" (
Attaching
J
1 )
Check the shapes of the <AC IN> terminal on the back side of the projector and the
power cord connector and fully insert.
2 )
Connect the power plug to an outlet.
Removing
J
1 )
Confirm that the projector is in standby mode and unplug the power cord from the
outlet.
2 )
Remove the plug from the <AC IN> terminal.
Powering ON/OFF
pages 2 to 8).
Æ
R
27
ENGLISH -
Advertisement
Table of Contents
