Epson Stylus Office BX610FW Series Fax Manual page 8

11.If you want to add another speed dial
entry, press OK and repeat steps 5
through 10.
12.Press Home to return to the first screen.
Editing a speed dial entry
1. Select Edit from the Speed Dial Setup
menu, then press OK. You see the
registered speed dial entry numbers.
2. Select or type the speed dial entry
number that you want to edit, then
press OK.
3. Use the numeric keypad with other
buttons on the control panel to edit the
phone number (& "Using control panel
buttons in fax mode" on page 6).
4. Press OK.
5. Use the numeric keypad with the other
buttons on the control panel to edit the
name for the speed dial (& "Using
control panel buttons in fax mode" on
page 6).
6. Press OK. You return to Edit.
7. Press Home to return to the first screen.
Deleting a speed dial entry
1. Select Delete from the Speed Dial
Setup menu, then press OK. You see
the registered speed dial entry
numbers.
2. Select or type the speed dial entry
number that you want to delete, then
press OK.
8
Setting Up Your Fax
3. You see a confirmation message. Select
Yes to delete the entry, and then press
OK.
Note:
To cancel deleting the entry, select No and
then press OK.
4. Press Home to return to the first screen.
Setting up your group dial list
The group dial list allows you to easily
send the same fax message to many fax
numbers.
Before creating a group dial entry, you
need to register a fax number as a speed
dial entry. You can register up to 60
entries combined with speed dial entries
and group dial entries.
Creating a new group dial list
1. Press l, r, u, or d to select F Setup and
then press OK.
2. Press l or r to select Fax Setting, and
then press OK.
3. Press d to select Group Dial Setup,
and then press OK.
4. Select Create, and then press OK. You
see the available group dial entry
numbers.
5. Select or type the group dial entry
number that you want to register.
6. Press OK. The screen displays Enter
Name.
7. Press the keys on the numeric keypad
to enter a name for the group dial entry
(up to 30 characters). Use the number
keys to enter letters from A to Z (in
upper case or lower case), numbers 0 to
9, and various symbols.
8. Press OK.