Sennheiser Set 830-TV Instruction Manual page 25

Cordless tv listening system
Hide thumbs Also See for Set 830-TV:
Table of Contents

Advertisement

If a problem occurs ...
Possible cause
Does the receiver's
Sennheiser logo face
the transmitter?
Is the volume of the
sound source suffi-
cient?
Is the volume of the
receiver sufficient?
Is the rechargeable
battery inserted
properly into the
receiver and fully
charged?
You hear the sound only with one ear
Possible cause
Is the balance
adjusted correctly?
Is the transmitter
set to mono?
The sound of your sound source is hardly intelligible
Possible cause
Is the speech intelli-
gibility enhance-
ment out of adjust-
ment?
Do you use a plasma
TV screen?
Is the receiver still
within the trans-
mitter's range?
22
Solution
Wear the receiver the right way
round, with the Sennheiser logo
facing the transmitter.
Set the volume on your sound
source to a medium value.
Increase the volume by turning the
volume control
(see page 13).
Remove the rechargeable battery
and reinsert it into the receiver.
If this doesn't help: recharge the
rechargeable battery
(see page 17).
Solution
Turn the balance control
left or right (see page 13).
Set the mono/stereo switch
on the transmitter to the left
(see page 14).
Solution
Press the "speech intelligibility"
9
button
on the transmitter
repeatedly until the sound is
optimally adjusted to your needs
(see page 15).
Make sure that the transmitter is
placed as far as possible from your
plasma TV screen (see page 6).
Move the receiver closer to the
transmitter.
1
on the receiver
2
to the
B

Advertisement

Table of Contents
loading

Table of Contents