I Ntercom F Eatures; Ntercom; All - GE 21006 User Manual

1. Dial the telephone number and wait for the line to connect.
2. When your call is answered, press the * tone button on the handset
number pad to temporarily change from PULSE dialing to TONE dialing.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset and the phone automatically returns to PULSE
(rotary) dialing mode.
R V
ECEIVER OLUME
When the handset is off the hook (in talk mode) you may adjust the
receiver volume by pressing the cid/vol (up or down arrow) button. There
are four volume levels to choose from. When the maximum or minimum
volume level is reached, the phone beeps twice. VOL 1 is minimum and
VOL 4 is maximum.
I

NTERCOM

The intercom feature allows you to have a conversation with another
handset without tying up the telephone line. And since the telephone line
is not being used, you can still receive incoming calls.
M I
AKING AN NTERCOM
Make sure the phone is OFF (not in TALK mode).
1. Press the page/int button on the handset.
2. Use the touch tone pad to select the handset you want to page with.
NOTE: To cancel page, press the EXIT soft key on the sending handset.
3. Wait for the person at the receiving handset to press the page/int button.
NOTE: If the receiving handset does not answer within two minutes, the intercom
call is automatically canceled. The originating handset displays NO ANSWER.
5. When finished, press the EXIT soft key or page button on either handset
to deactivate the intercom.
C
ONTROL
C

ALL

21