Installing The Phone; Connecting The Ac (Electrical ) Power; Onnecting The - GE 21006 User Manual

I
NSTALLING THE
Choose the best location to install your base and handset charge cradle.
Your base and handset charge cradle should be placed on a level surface
such as a desk or table top, or you may mount the base on a wall.
C

ONNECTING THE

1. On the base, plug one end of the power supply cord into the power jack
on the back of the base and the other end into an electrical outlet.
CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2489 that
came with this unit. Using other power supplies may damage the unit.
2. Plug the handset charge cradle into an electrical outlet.
NOTE: The charge indicator on the base and the charge indicator on the
handset charge cradle turns on to indicate the handset battery is charging.
Allow the system to charge for 12 hours prior to first use. If you don't
properly charge the system, battery performance is compromised.
P
HONE
AC (E
LECTRICAL
) P
OWER
charge
11