Input Search - Panasonic TH-47LFX6U Operating Instructions Manual

Options Adjustments
Item
Whether to show/hide No activity power off Precautions at the time of power ON is set.
Power On Message
On: The warning precautions are shown at the time of power ON.
(No activity power
Off: The warning precautions are not shown at the time of power ON.
off)
Note: This setting is enabled only if "No activity power off" is "Enable" (see page 33).
Set the functions that operates when
Signal: The "Signal" menu is displayed.
Screensaver: The "Screensaver" menu is displayed.
ECO menu: The "ECO Mode settings" menu is displayed.
Set up TIMER: The "Set up TIMER" menu is displayed.
DIGITAL LINK: Switch to DIGITAL LINK inputs. If it is ET-YFB100, the input switch menu on the YFB100 side is displayed.
Maintenance: Display the maintenance information.
Note:
Factory settings are as follows.
FUNCTION1 button: DIGITAL LINK
FUNCTION2 button: Maintenance
Use the FUNCTION button
Function button assign 1
Function button assign 2
Sets the lock setting for the display Power switch.
On: Power switch operation is disabled.
Power Switch Lock
Off: Power switch operation is enabled.
Note: This function is only for TH-47LFX6U.
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or
"Remote ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
-
/
The "Shipping" menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.
Options
Input Search
On screen display On
Initial input Off
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Priority: Searches "Primary Input" and "Secondary Input" in order and switches to an input with a signal.
Searching...
"Searching..." is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when "Priority" is selected.
(NONE) PC DVI
Note: This menu is available only when "Input lock" is "Off". (see page 46)
48
The menu screen is displayed. (Example: Maintenance)
Maintenance information
Maintenance information
Fan inspection required.
Please contact service provider.
FAN
No.1
OK
No.3
OK
No.5
OK
INSIDE
OK
START TEST
Press the FUNCTION button to exit from the menu.
1/3
Press ACTION ( ) button
HDMI DIGITAL LINK
Adjustments
is pressed.
No.2
OK
No.4
OK
No.6
SERVICE
button on the remote control and hold for more than 5 seconds.
Input Search
Input Search
Primary Input
Secondary Input
Off
select
1
adjust
2