Lab.gruppen C 88:4 Operation Manual page 38

6. Appendix
Level
Standby with remote power off via NomadLink
Powered on, idling.
Pink noise (1/8
rated power)
Pink noise
(max power)
*3)
Mains connector, 230 V CE version
Mains connector, 115 V ETL version
*1) The ampli er's PSU operates as a non-resistive load, so the calculation "Volts x Amps = Watts" would not be correct. Instead, measured and
speci ed here is what is known as the "Active Power" in the ampli er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw gures measured at 230 V. 115 V gures are 230 V gures multiplied by two.
*3) Figures measured at maximum sustainable power without tripping the mains fuse. Listed separately for 30 A/115 V and 16 A/230 V operation.
Note that the max. power condition is very extreme and will not occur during normal operation. Also note that the mains breaker will not be tripped
even if operation is momentarily in excess of max. ratings.
31
C Series C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 Operation Manual rev 2.2.3
Load Rated power
8 Ω / Ch. 700 x 4
16 Ω / Bridged 1400 x 2
4 Ω / Ch. 700 x 4
8 Ω / Bridged 1400 x 2
2 Ω / Ch. 300 x 4
4 Ω / Bridged 600 x 2
100 V / Ch. 700 x 4
200 V / Bridged 1400 x 2
8 Ω / Ch. 700 x 4
16 Ω / Bridged 1400 x 2
4 Ω / Ch. 700 x 4
8 Ω / Bridged 1400 x 2
4 Ω / Ch. 300 x 4
8 Ω / Bridged 600 x 2
100 V / Ch. 700 x 4
200 V / Bridged 1400 x 2
16 A, CEE7
20 A / 5-20P
Table 8.4d: C 28:4 Current Draw and Thermal Dissipation specifications
C 28:4
Line Current *2) Watt *1)
115 VAC 230 VAC In
0
123
Amp (I)
11.6 5.8 727
13.0 6.5 775
9.4 4.7 529
10.4 5.2 663
24.0 12.0 1589
20.8 10.4 1359
14.0 7.0 843
21.4 10.7 1458
Thermal Dissipation
Out Dissipated BTU/hr kCal/hr
0 0 0
0 123 420 106
Watt
350 377 1286 324
350 425 1450 365
150 379 1293 326
350 313 1068 269
933 656 2237 564
700 659 2249 567
300 543 1853 467
933 525 1790 451
0