Lab.gruppen C 88:4 Technical Data

C 88:4
Unprecedented power density –
•
(2 ohms) in 2U
Four channels – All channels bridgeable for 2- or 3-channel
•
configurations
Lo-Z or Hi-Z (70 V / 100 V) –
•
bridged
Patented Class TD amplifier topology
• ®
Voltage Peak Limiter (VPL) –
•
optimize each output for connected loads
An Installation Amplifier without Compromise
Installed or on tour, uncompromising quality begins with supe-
rior sound. Over the past decade, the sound of Lab.gruppen ampli-
fiers has earned praise from renowned FOH engineers and owners
of the world's premier sound rental companies. At the core of
the C Series high-power* model's tight and transparent sound is
patented Class TD technology. As a proprietary implementation of
tracking Class D, Class TD approaches the exceptional efficiency of
Class D while retaining the superior sonic quality of the best Class B
output stages.
A Regulated Switch Mode Power Supply
the remarkable efficiency of the C Series high-power models, while at
the same time providing stable operation even with wide fluctuations
in mains voltage. R.SMPS also works in conjunction with Class TD to
give extraordinary power density. More channels with more power
are condensed into a smaller package, allowing C Series amplifiers to
minimize rack space requirements and reduce installation costs.
Extreme power density demands efficient cooling, and here
Lab.gruppen's Intercooler proves remarkably effective. Thousands of
small copper cooling fins dissipate heat, and all output devices are
mounted on one row perpendicular to airflow for uniform cooling.
C Series amplifiers are uniquely capable of adapting to a wide
variety of demanding load conditions. Each channel has an
individually configurable Voltage Peak Limiter (VPL), which allows
the output to be optimized for any loudspeaker load – whether one
* C Series high-power models are:
C 88:4, C 68:4, C 48:4, C 24:4 and C 16:4
Total output of 8800 W
Selectable per channel, normal or
Configurable per channel to
(R.SMPS) contributes to
™
C Series: Dedicated Installation Amplifiers
Phoenix-type input connectors
•
Screw terminal output connectors
•
Comprehensive protection and warning –
•
current, DC, high temperature, very high frequency (VHF), short
circuit, open load, mains fuse protection, and soft start
Efficient and uniform Intercooler
•
NomadLink network ready
• ®
massive subwoofer or a series of small 100 V loudspeakers. VPL
works in combination with adjustable input gain to achieve maximum
headroom regardless of input levels or output impedances.
To assure reliability, and minimize service interruptions, C Series
amplifiers offer comprehensive warning and protection features.
Whenever faulty wiring, improper use, or extreme ambient tempera-
tures threaten trouble, a C Series amplifier gives clear and accurate
warning indications. Protection measures are inserted only when
dangerous thresholds are passed. Conditions are re-checked at
six-second intervals, and normal operation resumes when measure-
ments return to nominal.
Every C Series amplifier is ready for the NomadLink network right out
of the box. With NomadLink, key amplifier parameters are displayed
via DeviceControl software, and remote control of channel mutes
and power on/off is under network control. (NomadLink requires the
separate NLB 60E NomadLink Bridge & Network Controller.)
Applications
Auditoriums
•
Performing Arts Centers
•
Convention Centers
•
Stadiums and Arenas
•
Theme Parks
•
Hotels
•
Houses of Worship
•
Technical Data
Excessive output
cooling
®
Restaurants
•
Clubs
•
Educational Establishments
•
Boardrooms
•
Museums
•
Offices
•
Shopping Malls
•
Transportation Facilities
•