Table of Contents
Advertisement
W
M
ALL
OUNT
Because it is necessary to cradle
the handset for 12 hours prior to
connecting it for use the first time,
it is better to leave the unit on a flat
surface during inital charge before
attempting to hang it on the wall.
1. Plug the power supply cord into
the base and into an AC outlet.
2. Place the handset in the base.
Allow phone to charge for
12 hours before using the
first time. The CHARGE/IN USE
light comes on. If you don't
charge the handset battery
properly (for 12 hours) when you
first set up the phone, the
battery's performance will be
compromised.
3. After charging, plug the short
telephone line cord into the
phone jack on the back of the
unit and then to the wall jack.
4. Attach the wall mount bracket by
inserting the two tabs at the top
and then snapping the tab at the
bottom into place.
5. Slip the mounting holes over the
wall plate posts and slide the unit
down firmly into place. (Wall
plate not included.)
I
NSTALLATION
2
NOTE: Use only the Thomson
power supply # 5-2429 that is
compatible with this unit. Using
other adapters may damage the
unit.
3
4
1
5
7
Advertisement
Table of Contents
