Table of Contents
Advertisement
NEW CALL XX
NO CALLS
NO USER MEMORY
OUT OF RANGE
PAGING or
PAGING FROM
REPT
SEARCHING
SPKR
UNKNOWN CALLER/
NAME/NUMBER
Answering System Display Messages
The following messages show the status of the answering system or help you set up
and use the system.
0-59
CL (blinking)
- -
An (blinking)
F (blinking)
Six bars (blinking)
LA (Line Access)
XX represents the number of new CID records not
reviewed.
Indicates there are no CID records in memory.
Indicates the memory location contains no user
memories and the user is trying to mark a specific
user record for VIP MELODY.
May indicate handset is too far away from the base
or that the power has been interrupted. Move closer
and check connections.
Someone pressed the find button on the base
or delete/intercom/conf button on the handset.
Indicates a repeat call message. Indicates a new
call from the same number was received more than
once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
Indicates incoming call is from an area not
serviced by CID or the CID information was not sent.
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or an
announcement.
External line remote answering system.
5
Advertisement
Table of Contents
