IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Specifications page 224

Key Code Qual
6h 2Fh 00h
6h 3Fh 01h
6h 5Dh 00h
Bh 00h 00h
Bh 1Bh 00h
Bh 25h 00h
Bh 43h 00h
Bh 45h 00h
Bh 47h 00h
Bh 48h 00h
Bh 49h 00h
Bh 4Eh 00h
210
O E M Spec. of DCAS-34330/32160
Description
Unit attention. Command cleared by another initiator.
Unit attention. Micro code has been changed.
Predictive Failure Analysis threshold reached on
Aborted command. No additional sense code.
Aborted command. Synchronous data transfer error. (Extra ack detected)
Aborted command. Unsupported LUN. The drive supports L U N 0 only.
Aborted command. Message reject error. A message reject error occurs
when an inappropriate or unexpected message reject is received from the ini-
tiator or the initiator rejects a message twice.
Aborted command. Selection/Reselection failed. A selection/reselection
error occurs when the initiator fails to respond to a reselection within 250
milliseconds after the drive starts reselection. The reselection is attempted a
second time before setting selection/reselection failed sense code.
Aborted command. SCSI parity error.
Aborted command. Initiator detected error message received. An initiator
detected error occurs when the initiator detects an error, sends a message to
retry, detects the error again, and sends the retry message a second time.
The drive then sets check condition status with Initiator Detected Error.
Aborted command. Inappropriate/illegal message. An inappropriate or
illegal message occurs when the initiator sent a message that either is not
supported or is not in a logical sequence.
Aborted command. Overlapped commands attempted.