Table 121 Self-Test Log Data Structure - Hitachi HTS542516K9SA00 Specifications

Self-test log data structure
14.39.6
The following defines the 512 bytes that make up the Self-test log sector. All multi-byte fields shown in these
data structures follow the ATA/ATAPI-7 specifications for byte ordering.
Description
Data structure revision
Self-test number
Self-test execution status
Life time power on hours
Self-test failure check point
LBA of first failure
Vendor specific
...
Vendor specific
Self-test log pointer
Reserved
Data structure checksum
Note: n is 0 through 20

Table 121 Self-test log data structure

The data structure contains the descriptor of Self-test that the device has performed. Each descriptor is 24
bytes long and the self-test data structure is capable to contain up to 21 descriptors.
After 21 descriptors has been recorded, the oldest descriptor will be overwritten with new descriptor.
Self-test log pointer points the most recent descriptor. When there is no descriptor the value is 0. When there is
descriptor(s) the value is 1 through 21.
Page 152 of 171
5K250 (SATA) OEM Specification
Bytes Offset
2
1 n*18h+02h
1 n*18h+03h
2 n*18h+04h
1 n*18h+06h
4 n*18h+07h
15 n*18h+0Bh
2
1
2
1
512
00h
1FAh
1FCh
1FDh
1FFh