ATCOM APBX IP2G4A User Manual page 27

APBX IP2G4A User Manual
DID number
Define the expected DID number if your trunk passes DID on incoming calls. Leave this blank to match calls with any
no DID info. Special characters described in chapter 4.3 can be used here as same.
Extension
Define the extension for DID number. This field is only valid when you use SIP trunk for this inbound router. You can
only input number and '-' in this field, and the format can be XXX or XXX-XXX. The count of the number must be
only one or equal the count of the DID number. Up to 100 DID numbers can be set.
For example: Set DID number: 6000-6010， Extension: 6000， All inbound calls to 6000-6010 will be forwarded
to extension 6000. Set DID number: 6000-6010, Extension: 6000-6010, inbound calls to 6000-6010 will be
forwarded to corresponding extension.
Inbound Trunk Selection
Select the trunks for which this inbound route apply.
Time
Select appropriate time intervals for when this inbound route apply.
Path
Set the destination for incoming calls. If Extension is set, this option will not take effect.
26 ATCOM TECHNOLOGY CO., LIMITED